Electrical Wiring & Integration

Safe, compliant, and solar-ready wiring, grounding, and protection for new builds, upgrades, and retrofits.

IEEE Compliant installation standard
100% Load separation (essential vs non-essential)
Industrial Grade surge & lightning protection
Solar Ready wiring on all projects

When Electrical Integration Is Needed and How We Deliver It

Electrical work is where safety and solar readiness are won or lost. This section shows the common failure points first, then the Iselle approach to load separation and protection.

THE CHALLENGE

Fragile Foundations

Most residential and commercial wiring isn't designed for modern energy systems. Bad wiring causes fires, trips breakers, and can severely damage expensive solar inverters and batteries.

  • Outdated DBs cannot handle solar feed-in without modification
  • Poor earthing causes inverter faults and equipment damage
  • Missing surge protection leaves electronics exposed to grid spikes
Certified engineer performing technical inspection on a distribution board
THE ISELLE SOLUTION

Intelligent Load Management

We upgrade distribution boards and circuit layouts to separate essential and non-essential loads, improve protection, and prepare the site for safe solar integration.

  • Essential Circuits: Lights, Wi-Fi, fridges, and security run uninterrupted during an outage.
  • Heavy Loads: Pumps, ovens, and heaters are smartly routed or scheduled to prevent battery drain.
Distribution Board Upgrades

Engineering Standards for This Service

These are the protection, separation, and grounding standards used on electrical upgrades. Definitions and examples are linked in Resources.

Solar Pre-Wire

Building a new home? We install the necessary conduiting and cabling now, saving you thousands on future solar retrofits.

Surge Protection

Industrial-grade AC/DC surge protection devices (SPDs) and lightning arrestors to shield sensitive electronics from grid spikes.

Earthing & Grounding

Deep earth rod installations and equipotential bonding to eliminate shock hazards and ensure inverter compliance.

Process & Deliverables

This is the electrical-upgrade delivery summary for this service. The full cross-service workflow is on the How We Work page.

How We Deliver Electrical Upgrades

Electrical upgrade checkpoints before commissioning dependent systems such as Solar PV or water heating.

01

Inspection & Risk Review

We assess DB condition, cable routing, earthing quality, and load behavior.

02

Circuit Strategy

Essential and non-essential circuits are mapped for safety and future solar readiness.

03

Upgrade & Protection

DB works, SPD installation, grounding, and compliance-critical changes are executed.

04

Testing & Handover

Verification tests, labels, and documentation are completed before sign-off.

Need an electrical audit first?

Start with a site review if you suspect load imbalance, unsafe wiring, or poor grounding.

Book Electrical Audit View Methodology

What You Receive

Upgrade scope, protection changes, and test records for handover and future maintenance.